Oracle Utilities Meter Solution Cloud Service 2024 Implementation Professional Free Sample Questions

Description

Covers service points, devices and measuring components, measurement validation, estimation and editing, time-of-use mapping, usage calculations, Smart Grid Gateway integrations, and device events.

20 free sample questions226 in the full practice test

Try simulator

1Z0-1091-24 Sample Questions

  1. Question 1

    Advanced

    Service Points, Devices and Measuring Components · Configure Service Points, Devices and Measuring Components

    A large utility is implementing Oracle Utilities Meter Solution Cloud Service and needs to model a complex commercial site with multiple tenants, each having sub-meters that roll up to a master meter for the entire building. The utility needs to bill the building owner based on the master meter's consumption, while also tracking the individual consumption of each tenant for analytical purposes. Which configuration approach correctly models this hierarchy?

    Answer and explanation

    Correct answer: C

    The correct way to model master and sub-meter relationships is by creating a Service Point hierarchy. The master meter's SP is the parent, and each sub-meter's SP is a child. This structure accurately reflects the physical installation and allows the system to correctly aggregate usage and manage relationships between the meters for billing and analysis.

  2. Question 2

    Advanced

    Map Interval Measurements To Time-of-Use Periods · Configure work calendars

    A utility has a regulatory requirement to apply a special 'High Summer Peak' Time-of-Use (TOU) rate only on weekdays in July and August, excluding national holidays. However, if a national holiday falls on a Friday, the 'Shoulder' rate should be applied instead of the holiday rate. How should this complex calendar logic be configured?

    Answer and explanation

    Correct answer: C

    This scenario requires leveraging the full capabilities of Work Calendars. The base logic is set in the primary calendar. The Holiday Calendar handles standard holidays. The specific requirement for a holiday on a Friday is addressed by using the 'Holiday Day of Week Override' feature, which allows you to define a different TOU map for a holiday when it occurs on a specific day of the week, providing the necessary granular control.

  3. Question 3

    Intermediate

    Validation, Estimation, and Editing (VEE) · Configure VEE rules and exceptions

    During an implementation, a VEE rule designed to flag zero consumption for active commercial accounts is creating an excessive number of exceptions for businesses that are closed on weekends. The business requirement is to only apply this check on business days (Monday-Friday). What is the most efficient way to configure this VEE rule?

    Answer and explanation

    Correct answer: B

    VEE Rules can be configured with conditions to control when they are executed. The most efficient and maintainable solution is to create a Work Calendar that defines business days and then apply a condition to the VEE rule to only execute if the measurement's date falls on a day defined as a 'Work Day' in that calendar. This avoids complex rule duplication or manual processing.

  4. Question 4

    AdvancedMultiple answers

    Usage Calculation Groups/Rules and Usage Transactions · Configure base package usage calculation rules

    A solar utility offers a complex billing plan where customers are billed a base rate for their net consumption. However, if their solar generation exceeds their consumption in any 15-minute interval (i.e., they export power to the grid), they receive a credit for the exported amount calculated at a premium 'Feed-In Tariff' rate. Which combination of Usage Calculation Rules is required to implement this? (Select TWO)

    Answer and explanation

    Correct answers: A, C

    A Math rule is essential to perform the core calculation of Net = Consumption - Generation for every interval. This derived value is the basis for the subsequent billing logic.

    After the Math rule calculates the net value, a Conditional rule is needed to apply the correct pricing. It checks if the net value is greater than zero (consumption) or less than zero (export/generation) and directs the calculation to the appropriate rate.

  5. Question 5

    Intermediate

    Smart Grid Gateway (SGG) SaaS Command Processing · Describe the commands generally supported by SGG adapters and the Adapter Development Kit (ADK)

    A utility is deploying a new Head-End System (HES) from a vendor not supported by a base SGG adapter. The project requires sending on-demand read commands and receiving interval data payloads. What is the recommended Oracle approach for integrating this new HES with the Smart Grid Gateway (SGG) SaaS?

    Answer and explanation

    Correct answer: B

    The Adapter Development Kit (ADK) is specifically designed for this purpose. It provides a framework and set of tools to create custom adapters for new Head-End Systems, enabling them to communicate with the SGG by translating standard SGG commands (like on-demand reads) and data formats into the proprietary format of the target HES.

  6. Question 6

    Beginner

    Dynamic Aggregations · Explain the main components of Dynamic Aggregations

    True or False: The Dynamic Aggregation feature is primarily designed for real-time billing calculations and should be used in place of standard Usage Calculation Rules for all rate calculations.

    Answer and explanation

    Correct answer: B

    False. Dynamic Aggregation is designed for summarizing large volumes of measurement data for analytical purposes, such as network load analysis or transformer utilization. It is not intended for billing calculations. Billing and rate calculations are the primary function of Usage Subscriptions and Usage Calculation Rules.

  7. Question 7

    Intermediate

    Service Order Management · Configure Service Investigative Orders

    A water utility is tracking water pressure using a measuring component on their smart meters. They need to create a Service Investigative Order automatically whenever the pressure reading drops below a critical threshold for more than 3 consecutive readings. Which configuration item is used to define the logic that triggers the creation of this investigative order?

    Answer and explanation

    Correct answer: A

    This is a classic VEE-driven workflow. A VEE Rule is configured to check the pressure reading against the threshold. When the rule fails (pressure is too low), it creates a VEE Exception. The Exception Type associated with this specific exception is then configured with a command to create the Service Investigative Order. This provides a robust and auditable trail.

  8. Question 8

    Intermediate

    Measurements · Describe the Measurement Reprocessing functionality and Subtractive Interval Data

    A utility is migrating from a legacy system. The historical measurement data contains many overlapping and corrected readings for the same time periods. The business requires that only the most recent, authoritative reading for any given interval is loaded, and any previous versions are ignored. How is Measurement Reprocessing configured to handle this?

    Answer and explanation

    Correct answer: D

    The Measurement Reprocessing functionality is designed for this exact scenario. When new data is loaded for an interval that already has a measurement, a specific measurement condition can be used to trigger reprocessing. The system then automatically replaces the old measurement with the new, authoritative one, ensuring data integrity without manual cleanup or complex logic.

  9. Question 9

    Beginner

    Service Points, Devices and Measuring Components · Configure Division Security

    What is the primary function of configuring a 'Division' within the Oracle Utilities Meter Solution Cloud Service security model?

    Answer and explanation

    Correct answer: B

    Division security is a core data segregation mechanism. It allows an administrator to partition data, such as Service Points and Devices, into logical groups (Divisions). User access can then be restricted to specific divisions, ensuring that users can only view and manage data relevant to their role or region.

  10. Question 10

    IntermediateMultiple answers

    Integrations · Configure data exports

    A consultant needs to configure a data export process to send billing determinants to an external Customer Information System (CIS) every night. The CIS requires a flat file in a specific, fixed-width format. The process must be fully automated. Which components should be used to achieve this? (Select THREE)

    Answer and explanation

    Correct answers: B, C, E

    The Batch Control is the core component that defines and executes the export job. It specifies which algorithm to run and other parameters.

    The algorithm contains the business logic to extract the specific data (in this case, usage for billing determinants) from the database.

    To make the process automated, a scheduler is required to invoke the Batch Control process every night without manual intervention.

Register free for 10 more questions

Or unlock all 226 1Z0-1091-24 questions with explanations, timed mode and flashcards.