Aria Automation 8.10 Professional V2 Free Sample Questions

Description

Covers Aria Automation architecture and SaaS services, deployment types and identity and access management setup, log analysis and troubleshooting, and cloud template administration.

20 free sample questions202 in the full practice test Other versions: 2V0-31-23(199),2V0-31.20(78),2V0-731(122)

Try simulator

2V0-31-24 Sample Questions

  1. Question 1

    Intermediate

    – Installing, Configuring, and Setup · Manual Installation

    During a scaled-out installation of VMware Aria Automation using VMware Aria Suite Lifecycle, what is the primary purpose of the Workspace ONE Access cluster's virtual IP (VIP) address?

    Answer and explanation

    Correct answer: A

    In a clustered (scaled-out) deployment of Workspace ONE Access, a load balancer is configured with a virtual IP (VIP). This VIP serves as a single, consistent entry point for all authentication requests. The load balancer distributes traffic across the active nodes, ensuring that the identity service remains available even if one of the nodes fails.

  2. Question 2

    Intermediate

    – Installing, Configuring, and Setup · Manual Installation

    During a manual installation of VMware Aria Automation using Suite Lifecycle, what is the purpose of deploying a Workspace ONE Access cluster before deploying the VMware Aria Automation cluster?

    Answer and explanation

    Correct answer: A

    VMware Aria Automation relies on Workspace ONE Access (formerly VMware Identity Manager) for all authentication and authorization functions. Therefore, Workspace ONE Access must be deployed and configured first, as Aria Automation needs to be registered with it during its own installation process to establish identity services.

  3. Question 3

    IntermediateMultiple answers

    – Installing, Configuring, and Setup · Manual Installation

    When performing a manual, clustered installation of VMware Aria Automation using VMware Aria Suite Lifecycle, which TWO components must be configured in the external load balancer before initiating the product installation? (Select TWO)

    Answer and explanation

    Correct answers: D, E

  4. Question 4

    Intermediate

    – Installing, Configuring, and Setup · Manual Installation

    During a manual installation of VMware Aria Automation using Suite Lifecycle, an administrator needs to deploy a VMware Cloud Extensibility Proxy to support extensibility actions for a VMware Cloud on AWS endpoint. Where in the Suite Lifecycle UI is this component deployed?

    Answer and explanation

    Correct answer: C

    The Cloud Extensibility Proxy is considered an add-on component to an existing VMware Aria Automation environment. It is not deployed during the initial installation of the core product. To add it, an administrator must navigate to the environment within Lifecycle Operations and use the management options (typically represented by three dots) to add components like proxies.

  5. Question 5

    Advanced

    – Installing, Configuring, and Setup · Manual Installation

    Company Background:
    A global manufacturing company is performing a manual, scaled-out (clustered) installation of VMware Aria Automation using VMware Aria Suite Lifecycle. They are not using the Easy Installer due to complex network and security requirements.

    Current Situation:
    The administrator has successfully deployed the Suite Lifecycle appliance. They are now preparing to create the Aria Automation environment. The architecture requires that the Aria Automation cluster nodes, Workspace ONE Access nodes, and the Suite Lifecycle appliance all reside on different VLANs for security purposes.

    Requirements and Constraints:

    • The installation must be a three-node cluster for high availability.
    • An external load balancer has already been configured with VIPs for Aria Automation and Workspace ONE Access.
    • All necessary DNS records (A and PTR) have been created for all components and VIPs.
    • The administrator needs to follow the correct sequence of steps within Suite Lifecycle.

    Problem:
    Which sequence of actions must the administrator perform in Suite Lifecycle to successfully deploy the environment according to the requirements?

    Answer and explanation

    Correct answer: C

    For a manual installation, the correct process is to first ensure the product binaries are available in Suite Lifecycle (either from My VMware or a local source). Then, when creating the new Aria Automation environment, the wizard requires you to either select an existing Workspace ONE Access instance or deploy a new one. Since this is a fresh install, the administrator must choose 'New Installation' for Workspace ONE Access and provide all its configuration details (node IPs, VIP, passwords) first. Only after the Workspace ONE Access configuration is complete does the wizard proceed to the VMware Aria Automation configuration page where its cluster details are entered. This sequence is mandatory because Aria Automation depends on Workspace ONE Access for identity management.

  6. Question 6

    Beginner

    – Architecture and Technologies · Objective 1.1 – Describe the architecture of VMware Aria Automation

    A cloud administrator is reviewing the components of an on-premises VMware Aria Automation 8.10 deployment. Which core component is primarily responsible for managing the underlying Kubernetes cluster that hosts the application services?

    Answer and explanation

    Correct answer: B

    The VMware Aria Automation appliance itself contains the embedded Kubernetes cluster. The vracli command-line interface is the primary tool for managing the lifecycle and services of the appliance at a high level, including the state of the cluster services. Suite Lifecycle is for deploying and managing the lifecycle of the entire appliance, while Assembler is a service that runs within the appliance.

  7. Question 7

    Intermediate

    – Troubleshooting and Repairing · Objective 6.2 – Describe "vracli" commandlet options

    A VMware Aria Automation appliance is experiencing intermittent service failures. An administrator with SSH access needs to perform a health check on all deployed services within the appliance's Kubernetes cluster. Which command should be executed?

    Answer and explanation

    Correct answer: D

    The vracli service status command is the designated high-level utility for checking the health and status of all core VMware Aria Automation services running on the appliance. While kubectl get pods provides the status of Kubernetes pods, vracli service status gives a more application-centric view and is the recommended first step for a service health check.

  8. Question 8

    IntermediateMultiple answers

    – Installing, Configuring, and Setup · Objective 4.7 – Configure identity and access management (RBAC)

    A cloud architect is defining Role-Based Access Control (RBAC) for a new development project in VMware Aria Automation. The lead developers must be able to deploy and manage their team's deployments, while junior developers should only be able to view deployments without making changes. Neither group should be able to alter the project's configuration. Which two roles should be assigned? (Select TWO)

    Answer and explanation

    Correct answers: C, D

    The principle of least privilege dictates assigning the minimum required permissions. The 'Project Member' role allows users to deploy and manage their own deployments within a project. The 'Project Viewer' role provides read-only access to project resources. 'Project Administrator' would grant excessive permissions, allowing modification of the project configuration itself.

  9. Question 9

    Advanced

    – Administrative and Operational Tasks · Objective 7.10 – Create and Manage VMware Aria Automation Templates (NSX-T On-Demand Network Contructs)

    An administrator is authoring a VMware Aria Automation cloud template to deploy a multi-tier application. A requirement is that each deployment must create a new, dedicated, and isolated NSX-T routed network. This network must be automatically destroyed when the application deployment is deleted. Which YAML resource type should be used in the cloud template to achieve this?

    Answer and explanation

    Correct answer: A

    To create an on-demand, routed NSX-T network as part of a deployment, the Cloud.NSX.Network resource type must be used with the networkType property set to 'routed'. This instructs Aria Automation to provision a new Tier-1 Gateway and logical segment for the deployment, ensuring isolation, and to tear it down during deprovisioning. Using 'existing' would connect to a pre-configured network, and Cloud.vSphere.Network is for standard vSphere port groups.

  10. Question 10

    Beginner

    – Architecture and Technologies · Objective 1.2 – Describe the architectural differences between VMware Aria Automation and VMware Aria Automation SaaS

    True or False: A VMware Cloud Proxy is a mandatory component for an on-premises VMware Aria Automation deployment to manage on-premises vCenter Server endpoints.

    Answer and explanation

    Correct answer: B

    A VMware Cloud Proxy is required only when using VMware Aria Automation SaaS to connect to on-premises endpoints like vCenter Server. For a fully on-premises VMware Aria Automation deployment, the appliance communicates directly with the on-premises endpoints without the need for a separate Cloud Proxy.

Register free for 10 more questions

Or unlock all 202 2V0-31-24 questions with explanations, timed mode and flashcards.