Nokia Scalable IP Networks Free Sample Questions

4 subnets, 64 hosts per subnet

8 subnets, 32 hosts per subnet

4 subnets, 62 hosts per subnet

8 subnets, 30 hosts per subnet

Building routing tables using dynamic routing protocols.

Building forwarding tables for the lOMs.

Handling router configuration and management functions,

Processing and forwarding user application traffic.

Ethernet II can be used on broadcast networks where as 802.3 was designed for point-to-point networks.

Ethernet II identifies its payload type where as 802.3 indicates the frame length.

Ethernet II identifies its frame length while 802.3 indicates the payload type.

Ethernet II and Ethernet 802.3 are two different names for the same protocol.

ATM and Frame-Relay are circuit switched protocols and use Virtual Circuits to create logical separation of traffic.

ATM and Frame-Relay are point-to-point protocols and do not support different customers or traffic type on the same physical wire.

ATM and Frame-Relay are circuit switched protocols and use VLAN's to create logical separation of traffic.

ATM and Frame-Relay are circuit switched protocols and use IP Header information to create logical separation of traffic.

An Ethernet network with redundant paths not running STP.

An ATM network.

A SONET network.

All of the above.

Routers periodically send a copy of their table to their neighbors.

Routers send triggered updates to the entire network.

Routers know the entire network topology.

Routers use Shortest Path First algorithm to calculate the optimum paths.

At the edge of the provider's network facing the customer.

At the edge of the customer's network facing the provider.

h the core of the provider's network.

On the customer premises.

BGP

VPWS

VPRN

ISP

VPLS

An autonomous system is a network or group of networks operating under one administrative authority.

An autonomous system is another term for the collection of routers that make up the Internet

An autonomous system is a network or group of networks from many organizations running different IGP routing protocols, but all running BGP.

An autonomous system is a loosely defined term that can refer to any organization that has a connection to the Internet.

A PE router only connects to CE devices.

A PE router only connects to P routers.

A PE router connects to at least one P router.

APE router connects to at least one CE device.

PE routers support many different interface types connecting to CE devices.

pe routers only support Ethernet interfaces connecting to the CE.