Video Infrastructure Implementation Free Sample Questions

Description

Covers Expressway basic setup, Meeting Server API configuration, TelePresence Server and Conductor deployments, TMS installation and conference scheduling, and WebEx and Spark cloud solutions.

20 free sample questions202 in the full practice test

Try simulator

500-710 Sample Questions

  1. Question 1

    Advanced

    Advanced Cisco Expressway Features · Clustering on the Cisco Expressway

    A financial services company is deploying a Cisco Expressway cluster for high availability. During a failover test, an administrator notices that active calls are dropped when the primary peer goes offline, even though the other peers are operational. What is the most likely configuration error causing this issue?

    Answer and explanation

    Correct answer: D

    For active calls to be preserved during an Expressway peer failure, the 'Call preservation' feature must be explicitly enabled on the zones involved in the call path. This feature allows signaling to be re-established through an alternate peer without dropping the media session. While NTP sync is critical for cluster health and manual replication is a valid mode, neither directly addresses the preservation of active calls during a failover event. The failover license is for MRA, not general call preservation.

  2. Question 2

    Intermediate

    Advanced Cisco Expressway Features · Regular Expressions in a Cisco Expressway Environment

    A network engineer is configuring a search rule on a Cisco Expressway-C to route calls destined for the pattern (2..._..._....)@cisco.com to a specific Unified CM neighbor zone. The goal is to strip the domain and send only the 10-digit number. Which regular expression pattern and replacement string should be used in the search rule's transform?

    Answer and explanation

    Correct answer: C

    The correct regex pattern is (\d{10})@cisco\.com. (\d{10}) captures a group of exactly 10 digits. The . in cisco.com must be escaped with a backslash (\.) to be treated as a literal dot. The replace string \1 refers to the first captured group (the 10-digit number), effectively stripping the domain. The other options are incorrect: \0 refers to the entire matched string, (.*) is too broad, and \2 would refer to a second captured group which doesn't exist in that pattern.

  3. Question 3

    IntermediateMultiple answers

    Advanced Cisco Meeting Server Features · Cisco Meeting Server Resilient and Scalable Deployments

    A consultant is designing a resilient Cisco Meeting Server (CMS) deployment for a large enterprise. The design must support up to 2,000 concurrent HD calls and provide database redundancy. Which two components are essential for this design? (Select TWO)

    Answer and explanation

    Correct answers: B, E

    For database redundancy in a large-scale CMS deployment, a three-node (or five-node) database cluster is required to maintain quorum and handle failover. A single database is a single point of failure. A load balancer is essential for distributing traffic across the Call Bridges.

    To achieve scalability for 2,000 calls, multiple Call Bridge nodes are necessary. An external load balancer (like F5 or Citrix ADC) is required to distribute the incoming call load efficiently and evenly across these nodes.

  4. Question 4

    Intermediate

    Cisco TelePresence Management Suite Solution · Cisco TMS Administration Permissions

    A university has deployed Cisco TMS for scheduling lectures across multiple campuses. A new departmental administrator needs the ability to book conferences and manage endpoints only within their own department's folder in the TMS Navigator. They should not be able to see or modify any other department's resources. Which TMS permission setting is required to achieve this level of granular control?

    Answer and explanation

    Correct answer: A

    Cisco TMS provides granular, role-based access control (RBAC). To restrict a user's permissions to a specific folder, you must create a user group, assign the necessary permissions (like 'Booking'), and set the scope of those permissions to 'Folder'. The administrator would then be granted access only to the specific folder(s) assigned to that group. Default groups have global scope, and user-level permissions override group settings but are harder to manage.

  5. Question 5

    Intermediate

    Cisco Cloud Solutions · LDAP and Exchange Integration with Cisco Spark Configuration

    An organization wants to enable @webex meeting scheduling for its users directly from Microsoft Outlook, leveraging their on-premises Exchange server. The on-premises environment includes a CUCM, Expressway-C, and Expressway-E for call control and traversal. Which component is specifically required to be deployed and configured to provide this functionality?

    Answer and explanation

    Correct answer: C

    The Cisco Hybrid Calendar Service is responsible for integrating on-premises Microsoft Exchange (or Office 365) with the Webex cloud to enable features like @webex scheduling. This service is enabled by deploying the Calendar Connector software on the Expressway-C, which then communicates with the Exchange environment and the Webex cloud. The Directory Connector is for user synchronization, TMSXE is for TMS scheduling, and Expressway-E provides traversal but does not host the connector.

  6. Question 6

    Advanced

    Cisco Collaboration Meeting Room Solutions with Cisco TelePresence Server · Troubleshooting CMR Premises Solutions

    A field engineer is troubleshooting a Collaboration Meeting Rooms (CMR) Hybrid deployment. Users report that when they dial into a meeting from an on-premises endpoint, the call connects, but they cannot see video from Webex App participants. However, Webex App participants can see the on-premises endpoint's video. B2B calls between on-premises endpoints work correctly. What is the most probable cause of this one-way video issue?

    Answer and explanation

    Correct answer: D

    This classic one-way video scenario in a hybrid deployment points to a firewall issue. The on-premises endpoint can send its media (outbound UDP) to the Webex cloud, so cloud participants can see it. However, the media from the cloud participants (inbound UDP) is being blocked by the external firewall before it can reach the Expressway-E and be relayed to the on-premises endpoint. Ensuring the Webex cloud's IP address ranges are allowed for inbound UDP traffic to the Expressway-E is the correct solution.

  7. Question 7

    Beginner

    Advanced Cisco Expressway Features · Subzone Bandwidth Management on a Cisco Expressway

    When configuring bandwidth management on a Cisco Expressway, an administrator creates a pipe between a local subzone and a remote zone. What is the primary function of this pipe?

    Answer and explanation

    Correct answer: B

    In Expressway's Call Admission Control (CAC) model, a 'pipe' represents a network link and is used to define the total amount of bandwidth available between two locations (subzones or zones). When a call is placed between these locations, Expressway checks if there is sufficient bandwidth remaining in the pipe. If not, the call is rejected. This prevents oversubscription of the physical network link and ensures call quality.

  8. Question 8

    Intermediate

    Advanced Cisco Meeting Server Features · Cisco Meeting Server Resilient and Scalable Deployments

    True or False: When deploying Cisco Meeting Server, the Web Bridge component can be clustered for high availability independently of the Call Bridge cluster.

    Answer and explanation

    Correct answer: A

    This statement is true. The Web Bridge component of Cisco Meeting Server is stateless and can be deployed behind a standard load balancer for high availability and scalability. Its clustering is independent of the stateful Call Bridge cluster, which requires more complex peering and database replication for resilience.

  9. Question 9

    Intermediate

    Cisco TelePresence Management Suite Solution · Cisco TMS Operation

    A hospital is using Cisco TMS to manage its fleet of TelePresence endpoints for telemedicine consultations. To comply with internal security policies, all endpoints must be provisioned with a specific set of configurations, including disabling unused services and setting a complex administrator password. What is the most efficient method to enforce and maintain this standard configuration across all endpoints using TMS?

    Answer and explanation

    Correct answer: A

    The most efficient and scalable method is to use Configuration Templates in TMS. An administrator can define all the required security settings in a single template and then apply it to individual systems, folders, or the entire system tree. TMS will then automatically provision the endpoints with these settings and can be configured to periodically check for and correct any configuration drift, ensuring compliance.

  10. Question 10

    Beginner

    Cisco Cloud Solutions · Spark APIs and BOTs Configuration

    A developer is creating a bot for Webex Teams to automate room creation and user management. Which action must be taken in the Webex for Developers portal before the bot can interact with the Webex APIs on behalf of users?

    Answer and explanation

    Correct answer: D

    To interact with Webex APIs, every application, including a bot, must be registered in the Webex for Developers portal (developer.webex.com). This registration process generates a unique Bot Access Token. This token must be included in the authorization header of every API request the bot makes, authenticating it to the Webex cloud and granting it permissions based on its defined scopes.

Register free for 10 more questions

Or unlock all 202 500-710 questions with explanations, timed mode and flashcards.