Using HPE Oneview Free Sample Questions

Description

Covers data center infrastructure management concepts, HPE OneView architecture and licensing, installing and configuring OneView and Synergy, and provisioning servers and networks.

20 free sample questions201 in the full practice test

Try simulator

HPE2-T37 Sample Questions

  1. Question 1

    Intermediate

    Provision Hybrid IT infrastructure using HPE OneView · Secure Boot Configuration Troubleshooting

    A financial services client is deploying a new HPE Synergy environment and has a strict security mandate that all compute modules must use Secure Boot. An administrator has created a Server Profile Template with the Boot Mode set to 'UEFI'. However, when applying the profile to a Synergy 480 Gen10 Plus compute module, the compliance check fails with a Secure Boot-related error. What is the most likely cause for this failure?

    Answer and explanation

    Correct answer: A

    For Secure Boot to function correctly, the Boot Mode must be set to 'UEFI', and the firmware baseline applied by the server profile must contain firmware components that are digitally signed and certified for UEFI. If the SPP (Service Pack for ProLiant) version is outdated or incorrect, it may lack the necessary signed drivers and firmware, causing the Secure Boot compliance check to fail.

  2. Question 2

    Beginner

    Install and configure HPE OneView and related elements · Virtual Appliance Network Configuration

    An administrator is tasked with deploying HPE OneView as a virtual appliance in a VMware vSphere environment. During the OVF deployment wizard, they are prompted to select a network for the appliance. The chosen network is a standard vSwitch port group. After deployment and power-on, the appliance fails to obtain an IP address and is unreachable. What is the most common reason for this issue?

    Answer and explanation

    Correct answer: C

    By default, the HPE OneView virtual appliance attempts to acquire an IP address via DHCP. If no DHCP server is available on the selected network segment and a static IP address was not pre-configured in the OVF deployment properties, the appliance will fail to initialize its network interface correctly and will be unreachable.

  3. Question 3

    Intermediate

    Architect and design a data center management solution using HPE OneView · Multi-Domain Management

    A system architect is designing a multi-site HPE infrastructure managed by HPE OneView. The company has two primary data centers and wants centralized visibility and reporting for all managed hardware without logging into multiple OneView appliances. Which HPE solution should be implemented to meet this requirement?

    Answer and explanation

    Correct answer: B

    HPE OneView Global Dashboard is a separate virtual appliance specifically designed to provide a unified view of health, inventory, and compliance reporting across multiple HPE OneView appliances, which can be located in different data centers. It aggregates data to provide a single pane of glass for multi-site environments.

  4. Question 4

    IntermediateMultiple answers

    Provision Hybrid IT infrastructure using HPE OneView · Logical Interconnect Group Configuration

    An administrator is creating a Logical Interconnect Group (LIG) for an HPE Synergy frame. The design requires four 25GbE downlinks to each compute module and two 100GbE uplinks to the core network switches. Which components must be defined and configured to create this LIG? (Select TWO)

    Answer and explanation

    Correct answers: A, C

    The Interconnect Bay Mappings within a LIG define which type of interconnect module is expected in each bay of the frame. This is a fundamental step in defining the hardware topology of the logical interconnect.

    Uplink Sets are a mandatory component of a LIG. They define the physical uplink ports to be used, their speed, and which networks are carried over them. In this scenario, an Uplink Set would be created for the two 100GbE ports.

  5. Question 5

    Intermediate

    Manage and report on Hybrid IT infrastructure using HPE OneView · Appliance Backup Contents

    True or False: When an HPE OneView backup is performed, it includes the firmware and driver files stored in the internal repository.

    Answer and explanation

    Correct answer: B

    The HPE OneView backup file contains the appliance configuration, settings, and database. It does NOT include the large firmware bundle files (SPPs) that are uploaded to the internal repository. After restoring an appliance from backup, the administrator must manually re-upload the same SPP versions that were previously in use.

  6. Question 6

    Advanced

    Provision Hybrid IT infrastructure using HPE OneView · Multi-Chassis Link Aggregation (MLAG)

    Case Study:

    A mid-sized e-commerce company is modernizing its data center with HPE ProLiant DL servers and has deployed HPE OneView for management. The company has two main environments: a production cluster running on VMware vSphere and a development environment using Microsoft Hyper-V. The network team has mandated that all server network traffic must be redundant and has provided two separate physical switches for this purpose.

    The lead infrastructure engineer needs to create a Server Profile Template that can be used for servers in both the production and development environments. A key requirement is to ensure network connections are configured for high availability using Link Aggregation Control Protocol (LACP) across the two separate physical switches. The engineer has created a single Logical Interconnect Group that represents a pair of HPE Virtual Connect SE 40Gb F8 Modules.

    To meet the high availability requirement, the engineer plans to configure two FlexNICs on each server and group them into a single Link Aggregation Group (LAG). Which critical prerequisite must be met on the upstream physical switches to ensure the LACP-based LAG functions correctly across two separate chassis?

    Answer and explanation

    Correct answer: C

    Standard LACP (802.3ad) operates between a single device and another single device. To create a LAG that spans two physically separate upstream switches, those switches must support a proprietary or standards-based technology that makes them appear as a single logical switch to the downstream device (HPE Virtual Connect). This technology is commonly known as Multi-Chassis Link Aggregation (MLAG), Virtual PortChannel (vPC), or Virtual Switching System (VSS), depending on the vendor.

  7. Question 7

    Beginner

    Describe HPE OneView and its elements and positioning for customer business outcomes · Stateless Computing Concept

    A new administrator joins a team managing a large HPE Synergy environment. They notice that when a server profile is moved from one compute module to another, the server's identity, including MAC addresses and WWNs, moves with the profile. Which core concept of HPE OneView enables this 'stateless computing' capability?

    Answer and explanation

    Correct answer: B

    The Server Profile is the central construct in HPE OneView that encapsulates the entire server identity, including firmware, BIOS settings, network connections (MAC addresses), and SAN connections (WWNs). By abstracting this personality from the physical hardware, OneView allows the profile to be moved to any compatible compute module, which then assumes that identity. This is the essence of stateless computing.

  8. Question 8

    Intermediate

    Install and configure HPE OneView and related elements · Server Management Modes

    You are adding an existing HPE ProLiant DL380 Gen10 server to be managed by HPE OneView. The server is already running a production operating system. You want to manage its firmware and receive health status alerts in OneView, but you must not disrupt the server's network configuration or identity. Which management option should you choose when adding the server?

    Answer and explanation

    Correct answer: D

    The correct approach for an existing server is to create a server profile from a template, but before applying it, use the option to import the server's current configuration into the profile. This allows OneView to 'Manage' the server for firmware and health monitoring while ensuring that the initial profile application does not alter the server's production settings. This effectively puts the server under management without being disruptive.

  9. Question 9

    Intermediate

    Install and configure HPE OneView and related elements · HPE Compute Ops Management

    As part of the May 2024 exam update, HPE OneView's integration with cloud-based management has become a key topic. What is the primary function of HPE GreenLake for Compute Ops Management when integrated with an on-premises HPE OneView appliance?

    Answer and explanation

    Correct answer: B

    HPE GreenLake for Compute Ops Management offers a cloud-based console that provides a unified management experience for HPE servers. When integrated with OneView, it allows administrators to perform tasks like firmware management and health monitoring across globally distributed sites from a single, secure web portal, simplifying management at scale.

  10. Question 10

    Beginner

    Provision Hybrid IT infrastructure using HPE OneView · Bootable SAN Volume Configuration

    When defining storage volumes for a server profile, an administrator needs to ensure that the volume can be used as a boot device. Which specific property must be configured for the volume within the server profile?

    Answer and explanation

    Correct answer: A

    Within the server profile's SAN storage section, each attached volume has a 'Boot' property. This must be explicitly enabled for the intended boot volume. This action ensures that the server's HBA is configured to see this LUN as a bootable target.

Register free for 10 more questions

Or unlock all 201 HPE2-T37 questions with explanations, timed mode and flashcards.