Why Study with PlanetCert?
The Latest Questions
Practice questions and exam topics aligned with the current exam objectives.
Detailed Explanations
Go beyond the answer. Master the material with comprehensive learning and professional explanations for every concept.

AI-Powered Insights
Personalized preparation guidance that adapts to your performance and identifies weak spots automatically.
Exam Information
Official specifications published by Hitachi
Exam Format
Registration
Validity
Skills this practice test covers
- Identify each VSP 5000 model and its controller, front-end and back-end parts.
- Complete the pre-installation checks and cable the disk controllers (DKCs) in order.
- Create parity groups and choose a RAID level and spare drives for a workload.
- Plan a microcode upgrade and decide between the online and offline methods.
- Pick the right management tool for a task and set up the Hitachi Remote Ops SVP Agent.
- Back up the configuration, replace failed parts and manage drive sparing.
Explore related topics
HQT-4160 exam content
5 domains · 21 topics · 143 of 146 questions sorted by domain
System Architecture29 questions
This section is about knowing the hardware before touching it. Candidates compare the VSP 5000 models and describe the components, the front-end design with its Channel Boards (CHBs) and the back-end design with its Disk Adapters (DKAs).
Skills tested
- Tell the all-flash VSP 5000 models from their hybrid (H) versions.
- Describe each main component of the system and the job it does.
- Identify the supported Channel Boards (CHBs) and how hosts connect to them.
- Describe the back-end layout, the supported Disk Adapters (DKAs) and the drive trays.
Questions by topic
- Describe the VSP 5000 systems architecture, their components and their functions.13
- Describe the front-end design and layout of VSP 5000 systems and the supported Channel Boards (CHBs).5
- Describe the different VSP 5000 models and their specifications.4
- Describe the back-end design and layout of VSP 5000 systems and the supported Disk Adapters (DKAs).4
- Describe the VSP 5000 disk controllers (DKCs) interconnections.3
System Pre-Installation and Installation39 questions
This section runs from site preparation to a working system. It covers the pre-installation documents, the interconnections between disk controllers (DKCs), the New Installation procedure, network settings and microcode upgrades.
Skills tested
- Complete the pre-installation procedures and documents before work starts on site.
- Connect the disk controllers (DKCs) and check every interconnection cable.
- Decide when the New Installation procedure is the right one to use.
- Set the storage system's network settings for management access.
- Plan a storage microcode upgrade and choose between online and offline methods.
Questions by topic
- Describe the VSP 5000 storage systems pre-installation procedures and documentation.8
- Describe the VSP 5000 storage microcode upgrade procedures.6
- Describe the VSP 5000 storage systems network settings.7
- Describe the VSP 5000 disk controllers (DKCs) interconnections.10
- Describe the 'New Installation' procedure for VSP 5000 storage systems and when it is appropriate to use.4
- Describe the key steps involved in the installation of VSP 5000 storage systems.3
- Describe the back-end design and layout of VSP 5000 systems and the supported Disk Adapters (DKAs).1
System Configuration29 questions
With the hardware in place, candidates finish the installation and prepare storage for use. The section covers the key installation steps, creating parity groups, and online hardware upgrades and configuration changes.
Skills tested
- Follow the key steps that complete a VSP 5000 installation.
- Create parity groups and choose a RAID level for each workload.
- Add hardware or change the configuration while the system stays online.
Questions by topic
- Describe how to create Parity Groups on VSP 5000 storage systems.18
- Describe how to perform online hardware upgrades and configuration changes on VSP 5000 storage systems.10
- Describe the key steps involved in the installation of VSP 5000 storage systems.1
Management Software14 questions
This section checks which tool does which job. Candidates match tasks to Hitachi Device Manager - Storage Navigator, the Command Control Interface (CCI) and Ops Center Administrator, and set up the Hitachi Remote Ops SVP Agent.
Skills tested
- Choose between the Storage Navigator GUI, CCI commands and Ops Center Administrator for a task.
- Configure the Hitachi Remote Ops SVP Agent for error monitoring and email alerts.
Questions by topic
- Identify the VSP 5000 storage systems management tools and describe their function.9
- Describe the Hitachi Remote Ops SVP Agent configuration and functionality.5
Maintenance and Incident-Resolution32 questions
The last section covers support after handover. Candidates back up the configuration, troubleshoot incidents, replace failed parts and manage the processes behind drive sparing.
Skills tested
- Back up the system configuration and restore it when needed.
- Troubleshoot an incident from its logs and diagnostic data to its cause.
- Replace a field replaceable unit (FRU) safely and check the system afterward.
- Explain how a spare drive takes over and when data is copied back.
Questions by topic
- Describe how to troubleshoot incidents on VSP 5000 storage systems.14
- Describe how to backup the VSP 5000 storage systems configuration.4
- Describe the various processes associated with drive sparing.4
- Describe the parts-replacement procedures on VSP 5000 storage systems.10
Requirements
- No formal prerequisites; Hitachi Vantara writes the exam for its employees and partner installation professionals.
- Recommended: hands-on work with enterprise storage deployments, RAID concepts and network setup.
- Recommended: the instructor-led course 1090PI - Installing and Configuring Hitachi VSP 5000 Series.
About the HQT-4160 exam
Hitachi Vantara employees and partner engineers take HQT-4160 to show they can install, configure and support VSP 5000 series storage at a customer site. The exam covers the all-flash VSP 5100, 5200, 5500 and 5600 models and their hybrid (H) versions. Its objectives follow the job in order: architecture, pre-installation and installation, configuration, management software, then maintenance and incident resolution. Passing earns the Hitachi Vantara Qualified Professional – VSP 5000 Series Installation credential and a digital badge.
The PlanetCert practice test gives the most questions to pre-installation and installation, and parity group creation is the objective it tests most often. Every answer comes with an explanation, which helps where two parts look alike, such as a Channel Board (CHB) on the front end and a Disk Adapter (DKA) on the back end. Study Mode suits the architecture questions, where model details need a slow read. Brainy AI Assistant can walk through the steps of a New Installation or explain what the Hitachi Remote Ops SVP Agent reports.
How to earn the certification
- Earns
- Hitachi Vantara Qualified Professional – VSP 5000 Series InstallationProfessional
The credential is valid for three years.
How to prepare for HQT-4160
- 1
Draw the system from memory
Sketch a VSP 5000 with its controllers, Channel Boards (CHBs), Disk Adapters (DKAs), drive trays and the links between disk controllers (DKCs). Many architecture questions ask which part does which job.
- 2
Write out the install sequence
List the order from site checks and documents to cabling, power-on, network settings and the New Installation procedure. The installation section has the most practice questions.
- 3
Practise parity group choices
Parity group creation has more practice questions than any other objective. For a few sample workloads, choose a RAID level and spare drives, then check each choice against the 1090PI course material.
- 4
Rehearse a part swap and sparing
Walk through one part replacement and one drive failure from the first alert to the final check. Note when the spare drive takes over and when data is copied back.
- 5
End with timed practice
Take the HQT-4160 practice test in Timed Mode once each section feels clear. Ask Brainy AI Assistant about any tool or procedure named in a missed question.
Start a timed HQT-4160run
Hitachi Vantara lists the instructor-led course 1090PI - Installing and Configuring Hitachi VSP 5000 Series as the supporting material for this exam.
Who HQT-4160 is for
- Hitachi Vantara and partner engineers who install VSP 5000 systems at customer sites.
- Technical support engineers who maintain, upgrade and repair VSP 5000 storage after handover.
- Implementation specialists who set up parity groups and management tools before go-live.
Typical job titles: Storage installation engineer · Field service engineer · Systems engineer · Technical support engineer · Implementation specialist
HQT-4160 glossary
17 terms from the exam objectives and the vendor's official material, each defined in a sentence.
- Channel Boards (CHBs)
- Front-end boards that connect host servers to the storage system over protocols such as Fibre Channel.
- Command Control Interface (CCI)
- Hitachi's command-line interface for configuring storage and running tasks such as replication from a host or a script.
- Copy-back operations
- Copying data from a spare drive back to the replacement drive after a failed drive is changed.
- Disk Adapters (DKAs)
- Back-end boards that connect the controllers to the drives in the drive trays.
- Disk controllers (DKCs)
- The controller chassis of a VSP 5000 system. Larger configurations link several of them, so their interconnection is part of the installation.
- ESD precautions
- Steps such as wearing a grounded wrist strap that stop static electricity from damaging parts during replacement.
- Fibre Channel
- A high-speed network protocol that links servers to storage systems.
- Field Replaceable Unit (FRU)
- A part that a service engineer can replace on site, such as a board, a power supply or a drive.
- Hitachi Device Manager - Storage Navigator
- The graphical interface for setting up and managing a VSP 5000 storage system.
- Hitachi Remote Ops SVP Agent
- Monitoring software on the SVP that watches the storage system for errors and reports them to Hitachi Vantara support.
- Microcode
- The storage system's firmware. Engineers upgrade it online or offline, and the exam covers both procedures.
- New Installation
- The procedure for bringing a VSP 5000 into service on a customer site. The exam also asks when it is the right procedure to use.
- Ops Center Administrator
- Hitachi's web-based tool for provisioning and managing storage across systems.
- Parity Group
- A set of drives configured with one RAID level. The storage system then creates logical devices (LDEVs) from its capacity.
- RAID
- A way of spreading data across several drives, usually with parity or mirroring, so the data survives a drive failure.
- Service Processor (SVP)
- The management server attached to the storage system, used for maintenance tasks such as microcode upgrades and configuration backups.
- SVOS RF
- Hitachi's Storage Virtualization Operating System: the system software of the VSP 5000 and its storage features.