Why Study with PlanetCert?
The Latest Questions
Practice questions and exam topics aligned with the current exam objectives.
Detailed Explanations
Go beyond the answer. Master the material with comprehensive learning and professional explanations for every concept.

AI-Powered Insights
Personalized preparation guidance that adapts to your performance and identifies weak spots automatically.
Exam Information
Official specifications published by RUCKUS Networks
Exam Format
Registration
Validity
Skills this practice test covers
- Design VLANs with trunk and access ports, and route between them on ICX switches.
- Configure STP, RSTP or MSTP and other loop prevention features.
- Plan a PoE power budget and set port power priority on ICX switches.
- Build and manage an ICX stack, including adding and replacing members.
- Secure ports with ACLs, DHCP snooping, Dynamic ARP Inspection and 802.1X.
- Recover an ICX switch from a lost password, a boot failure or a failed stack.
Explore related topics
RCNI exam content
4 domains · 9 topics · 155 of 176 questions sorted by domain
Foundational Networking Concepts44 questions
This domain checks the networking knowledge that every ICX task builds on. It covers VLAN design, spanning tree and loop prevention, PoE requirements, basic LAN concepts, Layer 3 routing and basic QoS.
Skills tested
- Design VLANs with tagged and untagged ports to segment a network.
- Explain root bridge election, port roles and convergence in STP, RSTP and MSTP.
- Work out the PoE power budget for devices under 802.3af, 802.3at and 802.3bt.
- Classify and mark traffic for QoS with CoS and DSCP values.
- Route between VLANs with static routes or OSPF.
Questions by topic
- Basic LAN concepts9
- STP or loop prevention protocols10
- Layer 3 routing configurations4
- Basic QoS concepts9
- VLAN design or configuration11
- WLAN High-Density Troubleshooting1
RUCKUS Products & Solutions31 questions
This domain is about the ICX product line itself. Candidates match ICX switch families to edge, aggregation and core roles, and compare their port speeds, PoE support and licensing.
Skills tested
- Choose an ICX family, such as the ICX 7150 or ICX 7850, for an edge, aggregation or core role.
- Compare port density, multigigabit ports and PoE capacity across ICX models.
- Explain which ICX features depend on a license.
Questions by topic
- Stacking capabilities of the ICX12
- ICX software management10
- ICX product line9
ICX Solution Implementation56 questions
The largest domain is hands-on setup in FastIron. RUCKUS lists software management, stacking, PoE configuration, Layer 2 and 3 protocols and services, IPv4 or IPv6 addressing, ways to manage a switch, and multicast and security features.
Skills tested
- Upgrade FastIron images and manage the boot images on a switch or stack.
- Build an ICX stack and control which unit becomes the stack master.
- Configure PoE power priority and allocation on ICX ports.
- Set up IPv4 and IPv6 addressing, including DHCP and stateless autoconfiguration.
- Configure IGMP snooping, DHCP snooping, Dynamic ARP Inspection and 802.1X.
ICX Solution Troubleshooting24 questions
This domain covers finding faults and getting a switch back in service. Candidates troubleshoot layer by layer with ICX diagnostic commands, and recover switches and stacks from lost passwords, boot failures and bad images.
Skills tested
- Troubleshoot from the physical layer upward with ICX show and diagnostic commands.
- Perform password recovery from the console on an ICX switch.
- Restore a saved configuration or reload a known good image after a failure.
- Recover a stack after a member fails or must be replaced.
Requirements
- No formal prerequisites: anyone can book the exam.
- Recommended: five or more years around networks, with a good grasp of advanced Layer 2 and Layer 3 protocols.
- Recommended: the RUCKUS ICX 150 Implementer course from CommScope University.
- Recommended: hands-on troubleshooting time on RUCKUS ICX switches.
About the RCNI exam
RCNI checks that an engineer can deploy, manage and troubleshoot RUCKUS ICX switches in a production network. It assumes solid Layer 2 and Layer 3 knowledge, and one domain tests those networking foundations before the others turn to the ICX product line. ICX Solution Implementation is the largest domain, with software management, stacking, PoE, Layer 2 and 3 services, IPv4 and IPv6 addressing, management, multicast and security on FastIron. Passing earns the RUCKUS Certified Networking Implementer certification, valid for three years.
The PlanetCert practice test gives the most questions to ICX Solution Implementation and many to stacking and FastIron software management. Every answer comes with an explanation, which helps most where two settings look alike, such as a PoE power class and a port's power priority, or RSTP and MSTP. Study Mode suits the recovery tasks, where the order of the steps decides the answer. Brainy AI Assistant can explain how DHCP snooping and Dynamic ARP Inspection work together, or what happens when a stack member fails.
How to earn the certification
- Earns
- RUCKUS Certified Networking Implementer (RCNI)Professional
The RCNI certification is valid for three years.
How to prepare for RCNI
- 1
Work from the official RCNI blueprint
The RCNI Study Guide and Exam Blueprint lists the objectives in each section and the FastIron 08.0.95 guides that cover them. RUCKUS notes that the weights are approximate and that not every objective has questions.
- 2
Configure a lab ICX switch from scratch
Set up VLANs, a LAG, spanning tree and OSPF on an ICX switch running FastIron, and check each step with show commands before adding the next.
- 3
Build, break and rejoin a stack
Join switches into a stack and note which unit takes control. Then remove a member, replace it, and confirm that the stack recovers with its configuration intact.
- 4
Rehearse password and image recovery
Practise console password recovery, a reload from a backup image and a configuration restore until each runs without notes. The troubleshooting domain asks for these steps in the right order.
- 5
Time one run across all four sections
Take the RCNI practice test in Timed Mode after every section has been covered. Ask Brainy AI Assistant to explain each missed PoE or stacking question against FastIron's behavior.
Start a timed RCNIrun
RUCKUS recommends its virtual, instructor-led ICX 150 Implementer course at CommScope University, which teaches ICX switches running FastIron 8.0.95. The study guide also lists RSP 100 Routing and Switching Protocols and the RUCKUS FastIron Management Configuration Guide for release 08.0.95.
Who RCNI is for
- Network engineers who install and configure RUCKUS ICX switches for customers or their own company.
- Support engineers who troubleshoot and recover ICX switches and stacks.
- Sales engineers who size ICX switches, stacks and PoE budgets for a design.
- Network administrators who run ICX networks, including through SmartZone.
Typical job titles: Network engineer · Deployment engineer · Support engineer · Sales engineer · Network administrator
RCNI glossary
18 terms from the exam objectives and the vendor's official material, each defined in a sentence.
- 802.1X authentication
- Port-based access control that makes a device authenticate, usually through a RADIUS server, before it may send traffic.
- DHCP snooping
- A switch feature that accepts DHCP replies only from trusted ports, which blocks rogue DHCP servers.
- DSCP (Differentiated Services Code Point)
- A field in the IP header that marks a packet's priority for QoS.
- Dynamic ARP inspection (DAI)
- A feature that drops ARP packets whose IP-to-MAC binding does not match the DHCP snooping table.
- FastIron OS
- The operating system that runs on RUCKUS ICX switches.
- ICX stacking
- Joining several ICX switches so that they run and are managed as one logical switch.
- IGMP snooping
- A switch feature that listens to IGMP messages so that multicast traffic goes only to the ports that asked for it.
- Inline power management
- The ICX settings that decide how much PoE power each port may draw and which ports keep power when the budget runs short.
- Inter-VLAN routing
- Routing traffic between VLANs on a Layer 3 switch, through a virtual interface for each VLAN.
- IP source guard
- A port filter that allows traffic only from IP addresses learned through DHCP snooping on that port.
- IPv6 stateless autoconfiguration
- A way for an IPv6 host to build its own address from the prefix that a router advertises, without DHCP.
- Link Aggregation (LAG/LACP)
- Bundling several physical links into one logical link. LACP negotiates the bundle between the two switches.
- MSTP (Multiple Spanning Tree Protocol)
- A spanning tree version that maps groups of VLANs to separate tree instances, so different VLANs can use different paths.
- PoE standards (802.3af, 802.3at, 802.3bt)
- The IEEE standards for PoE, each one allowing more power per port than the one before.
- Power over Ethernet (PoE)
- Sending electrical power and data over the same Ethernet cable to devices such as access points and phones.
- SmartZone
- The RUCKUS controller that can also manage ICX switches centrally, including their firmware and configuration.
- Spanning Tree Protocol (STP)
- A protocol that blocks redundant switch paths to stop loops, and opens them again when a link fails.
- Stack master election
- The process that decides which unit in an ICX stack controls the other members.