Why Study with PlanetCert?
The Latest Questions
Practice questions and exam topics aligned with the current exam objectives.
Detailed Explanations
Go beyond the answer. Master the material with comprehensive learning and professional explanations for every concept.

AI-Powered Insights
Personalized preparation guidance that adapts to your performance and identifies weak spots automatically.
Exam Information
Official specifications published by Cisco
Exam Format
Registration
Validity
Skills this practice test covers
- Troubleshoot EIGRP, OSPF and BGP adjacencies, authentication and path selection.
- Fix redistribution loops with route maps, route tags and filtering.
- Configure and verify a single-hub DMVPN with mGRE, NHRP and IPsec.
- Protect routers with IOS AAA, uRPF, IPv6 traffic filters and control plane policing.
- Troubleshoot DHCP, SNMP, IP SLA and NetFlow problems with logging and conditional debugs.
- Read Cisco Catalyst Center Assurance health data to locate a network fault.
Explore related topics
300-410 exam content
4 domains · 43 topics · 193 of 383 questions sorted by domain
Layer 3 Technologies35%80 questions
The largest domain is routing itself. Candidates troubleshoot administrative distance, route maps, loop prevention, redistribution and summarization, then EIGRP, OSPF and BGP in depth, including VRF-Lite and policy-based routing.
Skills tested
- Trace a routing loop to missing tags or filters after two-way redistribution.
- Find why an EIGRP neighbor or OSPF adjacency fails, including authentication errors.
- Fix OSPF area type, router type and virtual link problems.
- Troubleshoot BGP path preference, route reflectors and inbound and outbound policies.
- Configure VRF-Lite and policy-based routing, and describe how Bidirectional Forwarding Detection speeds up failure detection.
Questions by topic
- Troubleshoot OSPF (v2/v3) neighbor relationship and authentication4
- Troubleshoot EIGRP (classic and named mode) Stubs3
- Troubleshoot redistribution between any routing protocols or routing sources6
- Troubleshoot OSPF (v2/v3) area types6
- Configure and verify policy-based routing4
- Troubleshoot BGP Route reflector4
- Configure and verify VRF-Lite6
- Describe Bidirectional Forwarding Detection3
- Troubleshoot BGP Policies (inbound/outbound filtering, path manipulation)4
- Troubleshoot EIGRP (classic and named mode) Address families (IPv4, IPv6)3
- Troubleshoot EIGRP Load balancing (equal and unequal cost)4
- Troubleshoot OSPF (v2/v3) Virtual link5
- Troubleshoot BGP Path preference (attributes and best-path)8
- Troubleshoot administrative distance (all routing protocols)4
- Troubleshoot loop prevention mechanisms (filtering, tagging, split horizon, route poisoning)6
- Troubleshoot EIGRP (classic and named mode)3
- Troubleshoot BGP Neighbor relationship and authentication4
- Troubleshoot EIGRP (classic and named mode) Neighbor relationship and authentication3
VPN Technologies20%34 questions
This domain mixes design knowledge with hands-on work. Candidates describe MPLS operations and MPLS Layer 3 VPNs, then configure and verify a single-hub DMVPN.
Skills tested
- Describe how label switching routers use LDP to forward traffic along a label switched path.
- Describe how an MPLS Layer 3 VPN keeps customer routes apart.
- Build a single-hub DMVPN with mGRE tunnels, NHRP and IPsec protection.
- Verify dynamic neighbors and spoke-to-spoke tunnels in a DMVPN.
Questions by topic
- Configure and verify DMVPN (single hub)4
- Describe MPLS Layer 3 VPN10
- Configure and verify DMVPN (single hub) IPsec4
- Configure and verify DMVPN (single hub) Spoke-to-spoke7
- Describe MPLS operations (LSR, LDP, label switching, LSP)3
- Configure and verify DMVPN (single hub) NHRP6
Infrastructure Security20%29 questions
This domain protects the routers themselves. Candidates troubleshoot IOS AAA, access control lists, unicast reverse path forwarding (uRPF) and control plane policing, and describe the IPv6 first hop security features.
Skills tested
- Troubleshoot IOS AAA with TACACS+, RADIUS and the local database.
- Fix standard, extended and time-based IPv4 ACLs and IPv6 traffic filters.
- Use uRPF to drop packets with spoofed source addresses.
- Troubleshoot control plane policing that affects SSH, SNMP or routing protocol traffic.
- Describe RA guard, DHCP guard, ND inspection and source guard.
Questions by topic
- Unicast reverse path forwarding (uRPF)6
- Troubleshoot device security using IOS AAA (TACACS+, RADIUS, local database)5
- Troubleshoot control plane policing (CoPP)5
- Troubleshoot router security features IPv4 access control lists (standard, extended, time-based)7
- Describe IPv6 First Hop security features (RA guard)4
- Troubleshoot router security features2
Infrastructure Services25%50 questions
The second-largest domain covers the services that keep a network manageable. Candidates troubleshoot device management, SNMP, logging, DHCP, IP SLA and NetFlow, and use Cisco Catalyst Center Assurance to find faults.
Skills tested
- Troubleshoot console, VTY, SSH and SCP access to devices.
- Troubleshoot SNMPv2c and SNMPv3, syslog and conditional debugs.
- Fix DHCP clients, the IOS DHCP server, DHCP relay and DHCP options for IPv4 and IPv6.
- Use IP SLA with tracking objects to measure jitter, delay and connectivity.
- Troubleshoot Flexible NetFlow and IPFIX, and read Catalyst Center Assurance health data.
Questions by topic
- Troubleshoot network performance issues using IP SLA (jitter, tracking objects, delay, connectivity)3
- Troubleshoot IPv4 and IPv6 DHCP2
- Troubleshoot NetFlow (v5, v9, flexible NetFlow)6
- Troubleshoot SNMP (v2c, v3)4
- Troubleshoot IPv4 and IPv6 DHCP (DHCP options)4
- Troubleshoot network problems using logging (local, syslog, debugs, conditional debugs, timestamps)3
- Troubleshoot network performance issues using IP SLA (tracking objects)5
- Troubleshoot network problems using logging (conditional debugs)4
- Troubleshoot IPv4 and IPv6 DHCP (DHCP client)4
- Troubleshoot IPv4 and IPv6 DHCP (DHCP relay)5
- Troubleshoot network problems using Cisco DNA Center assurance3
- Troubleshoot device management4
- Troubleshoot IPv4 and IPv6 DHCP (IOS DHCP server)3
Requirements
- No formal prerequisites: anyone can book the exam.
- Recommended: CCNA or the same networking knowledge.
- Recommended: three to five years of enterprise networking experience with EIGRP, OSPF and BGP.
- Recommended: an understanding of VPN technologies and basic network security.
About the 300-410 exam
Network engineers take 300-410 ENARSI to show they can configure and troubleshoot advanced routing and network services on Cisco enterprise routers. Its four domains cover EIGRP, OSPF and BGP with redistribution and route maps, DMVPN and MPLS VPNs, router security, and services such as DHCP, SNMP and NetFlow. Passing it earns the Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation certification. With the core exam ENCOR, it also completes CCNP Enterprise.
Layer 3 Technologies is the largest domain, and it has the most questions in the PlanetCert practice test, from administrative distance to BGP path preference. Explanations trace each fault to its cause, such as an OSPF area type mismatch or a route tag that a redistribution route map never set. Study Mode suits the long troubleshooting scenarios, where every line of output matters. Brainy AI Assistant can walk through the BGP best-path order or explain why an EIGRP route is stuck in active.
How to earn the certification
- Earns
- Cisco Certified Specialist - Enterprise Advanced Infrastructure ImplementationProfessional (concentration exam)
The certification is valid for three years and renews with Continuing Education credits or qualifying exams.
- Before
- 200-301 Cisco Certified Network Associate (CCNA)
Recommended but not required. It covers the routing basics that ENARSI builds on.
- 200-301 Cisco Certified Network Associate (CCNA)
How to prepare for 300-410
- 1
Run a multi-protocol router lab
Set up virtual IOS routers with EIGRP in one part of the network, OSPF in another and BGP at the edge. Most objectives start with troubleshoot, so plan to break and repair this lab often.
- 2
Redistribute both ways, then repair it
Configure two-way redistribution between EIGRP and OSPF, watch for loops and odd paths, then fix them with route tags and route maps. This one exercise touches several Layer 3 objectives.
- 3
Grow a DMVPN from one GRE tunnel
Start with a single GRE tunnel, move to mGRE with NHRP and add IPsec protection. Then confirm that spoke-to-spoke tunnels form when traffic needs them.
- 4
Practise the service toolkit
Use conditional debugs, syslog timestamps, IP SLA tracking objects and Flexible NetFlow exports on purpose. Infrastructure Services is the second-largest domain, and these tools appear across it.
- 5
Replay every missed fault
Take the 300-410 practice test in Study Mode one domain at a time, then in Timed Mode. Rebuild each missed fault in the lab and ask Brainy AI Assistant to explain the output.
Start a timed 300-410run
Cisco's course is Implementing Cisco Enterprise Advanced Routing and Services (ENARSI), offered as instructor-led training and as e-learning. Cisco also offers an online learning path and a practice exam for it.
Who 300-410 is for
- Network engineers who run routing, VPNs and network services in Cisco enterprise networks.
- Engineers working toward CCNP Enterprise who choose the advanced routing concentration.
- Senior network administrators who troubleshoot EIGRP, OSPF and BGP in production networks.
- Engineers who aim for CCIE Enterprise Infrastructure and need deep routing practice first.
Typical job titles: Network engineer · Senior network administrator · Network architect · Systems engineer · Network consultant
300-410 glossary
19 terms from the exam objectives and the vendor's official material, each defined in a sentence.
- Administrative distance
- The trust value a router gives each routing source. When two sources offer the same route, the lower value wins.
- Bidirectional Forwarding Detection
- A lightweight hello protocol that detects a failed link or neighbor much faster than routing protocol timers.
- Cisco Catalyst Center Assurance
- The monitoring part of Cisco Catalyst Center, formerly Cisco DNA Center, which shows device and network health and flags issues.
- Control plane policing (CoPP)
- A policy applied to a router's control plane that limits the traffic allowed to reach its CPU.
- DMVPN
- Dynamic Multipoint VPN: a hub-and-spoke design built on mGRE, NHRP and IPsec, in which spokes can form direct tunnels.
- Feasible successor
- In EIGRP, a backup route that meets the feasibility condition and can take over at once, without a query.
- Flexible NetFlow
- A NetFlow version in which the administrator chooses which packet fields define and describe a flow.
- IP SLA
- An IOS feature that sends test traffic to measure delay, jitter and reachability, often tied to tracking objects.
- MPLS Layer 3 VPN
- A provider VPN that keeps each customer's routes in a separate VRF and carries them across an MPLS core.
- NHRP
- Next Hop Resolution Protocol: the DMVPN protocol that maps tunnel addresses to real addresses, so spokes can find each other.
- NSSA
- Not-so-stubby area: an OSPF stub area that can still bring in external routes from an ASBR inside it.
- RA guard
- An IPv6 first hop security feature that blocks router advertisements on ports where no router should be.
- Redistribution
- Passing routes learned by one routing protocol or source into another, such as OSPF routes into EIGRP.
- Route map
- A sequence of match and set statements that selects routes and can change their attributes.
- Route reflector
- An iBGP router that passes routes between iBGP peers, so that not every pair of peers needs a session.
- Stuck in active
- An EIGRP state in which a router waits too long for replies to its queries about a lost route.
- TACACS+
- A Cisco-developed AAA protocol that separates authentication, authorization and accounting and encrypts the whole payload.
- uRPF
- Unicast reverse path forwarding: a check that drops packets whose source address has no valid path back.
- VRF-Lite
- Virtual routing and forwarding without MPLS: separate routing tables on one router keep groups of traffic apart.
Related practice tests
- 300-535Automating and Programming Cisco Service Provider Solutions (SPAUTO)
- 200-901CCNA Automation (DevNet Associate)
- 200-201CCNA Cybersecurity (CyberOps Associate)
- 200-301Cisco Certified Network Associate (CCNA)
- 300-420Designing Cisco Enterprise Networks (ENSLD)